用途 半自动零件机采用槽刚焊接机架，为蓄电池生产专用设备。 工作原理 把零件模具固定在预定位置，把两颗10mm螺丝锁紧，然后手工把铅倒入模具，等铅凝固后手动翻板，然后按按钮切断浇口，再退回，再手动把翻板翻起，浇口内铅回到熔铅炉内熔化，机器上按开模，有抽芯的模具，先按抽芯退回后再开模，如先按开模容易把后顶针撞弯，没抽芯模具，直接开模等产品掉下后再合模，有抽芯的合模后按一下抽芯进，然后把翻板合下后进行第二次工作。 Purposes The semi-automatic parts machine adopts a slot welded frame, which is a special equipment for battery production. Working principle Fix the part mold in the predetermined pas代ion, lock the two 10mm screws, and then manually pour the lead into the mold, wait for the lead to solidify, and manually flip the plate, then press the button to cut off the gate, then return it, and then manually flip the flip up, The lead in the gate is returned to the lead melting furnace to be melted. Press the mold on the machine to open the mold. For the mold with core pulling, first press the core to return and then open the mold. If the mold is opened first, it is easy to bend the rear thimble. Open the mold directly and then close the mold after the product falls. After closing the mold with a core pull, press the core pull to enter, and then close the flap for the second work.
